1000The highest level error is reported at the end of transfer. Retries and error cor-
rection are attempted. Recovered and/or corrected data (if any) is transferred with
CHECK CONDITION status and RECOVERED ERROR Sense Key set at the
end of the transfer.
no err The transfer length is exhausted.
soft err The transfer length is exhausted. Transferred data includes blocks con-
taining recovered errors. The information byte in the sense data will
contain the logical block address of the last recovered error.
hard err Data transfer stops when an unrecoverable error is encountered. The
unrecoverable block is not transferred to the initiator. The file then
creates the CHECK CONDITION status with the appropriate Sense
Key.
1001The highest level error is reported at the end of transfer. Retries and error cor-
rection are attempted. Recovered and/or corrected data (if any) is transferred with
CHECK CONDITION status and RECOVERED ERROR Sense Key set at the
end of the transfer.
no err The transfer length is exhausted.
soft err The transfer length is exhausted. Transferred data includes blocks con-
taining recovered errors. The information byte in the sense data will
contain the logical block address of the last recovered error.
hard err Data transfer stops when an unrecoverable error is encountered. The
unrecoverable block is transferred to the initiator. The file then creates
the CHECK CONDITION status with the appropriate Sense Key.
1010The highest level error is reported at the end of transfer. Retries are attempted but
ECC is not applied. Recovered and/or corrected data (if any) is transferred with
CHECK CONDITION status and RECOVERED ERROR Sense Key set at the
end of the transfer.
no err The transfer length is exhausted.
soft err The transfer length is exhausted. Transferred data includes blocks con-
taining recovered errors. The information byte in the sense data will
contain the LBA of the last recovered error.
hard err Data transfer stops when an unrecoverable error is encountered. The
unrecoverable block is not transferred to the initiator. The file then
creates the CHECK CONDITION status with the appropriate Sense
Key.
1011The highest level error is reported at the end of transfer. Retries are attempted but
ECC is not applied. Recovered and/or corrected data (if any) is transferred with
CHECK CONDITION status and RECOVERED ERROR Sense Key set at the
end of the transfer.
no err The transfer length is exhausted.
soft err The transfer length is exhausted. Transferred data includes blocks con-
taining recovered errors. The information byte in the sense data will
contain the LBA of the last recovered error.
hard err Data transfer stops when an unrecoverable error is encountered. The
unrecoverable block is transferred to the initiator. The file then creates
the CHECK CONDITION status with the appropriate Sense Key.
SCSI COMMAND SET 99
To Next Page
Loading...
