1100The highest level error is reported at the end of transfer. Retries and error cor-
rection are attempted. Recovered and/or corrected data (if any) is transferred with
CHECK CONDITION status and RECOVERED ERROR Sense Key set at the
end of the transfer.
no err The transfer length is exhausted.
soft err The transfer stops on the first soft error detected. The information in
the sense data shall contain the LBA of the block in error.
hard err Data transfer stops on the unrecoverable error. The file then creates the
CHECK CONDITION status with the appropriate Sense Key.
1101The highest level error is reported at the end of transfer. Retries and error cor-
rection are attempted. Recovered and/or corrected data (if any) is transferred with
CHECK CONDITION status and RECOVERED ERROR Sense Key set at the
end of the transfer.
no err The transfer length is exhausted.
soft err The transfer stops on the first soft error detected. The information in
the sense data shall contain the LBA of the block in error.
hard err Data transfer stops on the unrecoverable error. The unrecoverable error
block is returned to the initiator. The file then creates the CHECK
CONDITION status with the appropriate Sense Key.
1110The highest level error is reported at the end of transfer. Retries are attempted but
ECC is not applied. Recovered data is transferred with CHECK CONDITION
status and RECOVERED ERROR Sense Key set at the end of the transfer.
no err The transfer length is exhausted.
soft err The transfer stops on the first soft error detected. The recovered error
block is returned to the initiator. The information in the sense data
shall contain the logical block address of the block in error.
hard err Data transfer stops on the unrecoverable error. The file then creates the
CHECK CONDITION status with the appropriate Sense Key.
1111The highest level error is reported at the end of transfer. Retries are attempted but
ECC in not applied. Recovered and/or corrected data (if any) is transferred with
CHECK CONDITION status and RECOVERED ERROR Sense Key set at the
end of the transfer.
no err The transfer length is exhausted.
soft err The transfer stops on the first soft error detected. The information in
the sense data shall contain the logical block address of the block in error.
hard err Data transfer stops on the unrecoverable error. The unrecoverable error
block is returned to the initiator. The file then creates the CHECK
CONDITION status with the appropriate Sense Key.
100 OEM Spec. of DDRS-3xxxx
To Next Page
Loading...
