Key Code Qual Description
Bh 25h 00h Aborted command. Unsupported LUN. The drive supports LUN 0 only.
Bh 43h 00h Aborted command. Message reject error. A message reject error occurs
when an inappropriate or unexpected message reject is received from the ini-
tiator or the initiator rejects a message twice.
Bh 45h 00h Aborted command. Selection/Reselection failed. A selection/reselection
error occurs when the initiator fails to respond to a reselection within 250
milliseconds after the drive starts reselection. The reselection is attempted a
second time before setting selection/reselection failed sense code.
Bh 47h 00h Aborted command. SCSI parity error.
Bh 48h 00h Aborted command. Initiator detected error message received. An initiator
detected error occurs when the initiator detects an error, sends a message to
retry, detects the error again, and sends the retry message a second time.
The drive then sets check condition status with Initiator Detected Error.
Bh 49h 00h Aborted command. Inappropriate/illegal message. An inappropriate or
illegal message occurs when the initiator sent a message that either is not
supported or is not in a logical sequence.
Bh 4Eh 00h Aborted command. Overlapped commands attempted.
210 OEM Spec. of DDRS-3xxxx
To Next Page
Loading...
