Table 17. Feature codes for IBM Full Disk Encryption disk drive sets
Feature
Code
Size and description (see
Notes)
Disk speed in RPM
(K = 1000)
DS8000 Models
5116 300 GB FDE Drive Set 15K
941 and 94E
5216 450 GB FDE Drive Set 15K
5108 146 GB FDE Drive Set 15K
951 and 95E
5308 300 GB FDE Drive Set 15K
5608 450 GB FDE Drive Set 10K
5708 600 GB FDE Drive Set 10K
5758 900 GB FDE Drive Set 10K
5858 3 TB FDE Half Drive Set 7.2K
6156 400 GB SSD FDE Half Drive
Set
n/a
6158 400 GB SSD FDE Drive Set n/a
Note:
v Factory orders only. An intermix of encryption and nonencryption disk drives is not
supported.
v Base model 941 requires that you install a minimum of one regular disk drive feature on
each image. Because Model 941 has only one image, it requires one regular disk drive
feature per machine.
Feature codes for disk enclosures
Use disk enclosure feature codes to order the disk enclosures for your storage unit.
Table 18 describes the feature codes.
Table 18. Disk enclosure feature code
Feature Code Description Models
1210 Disk enclosure pair 941 and 94E
1241 Disk enclosure pair
Note: The disk enclosure
feature contains two disk
enclosure filler features in the
disk enclosure. The enclosure
pair supports the installation
of one to three disk features.
Any disk enclosure filler
must be removed when
regular disk drive or Standby
CoD disk drive set features
are added to the model.
951 and 95E
1242 HD STD enclosure indicator
1243 HD SSD enclosure indicator
1244 3.5" disk drive enclosure
indicator
1245 HD SSD enclosure indicator
for 400 GB disk drives
96 Introduction and Planning Guide
To Next Page
Need help?
General