Table 40. Operating environment license feature codes
Feature code Description Hardware models
7030 OEL - inactive
941, 951
7031 OEL - 1 TB unit
7032 OEL - 5 TB unit
7033 OEL - 10 TB unit
7034 OEL - 25 TB unit
7035 OEL - 50 TB unit
7040 OEL - 100 TB unit
7045 OEL - 200 TB unit
7050 OEL - inactive
7051 OEL - 1 unit
7052 OEL - 5 unit
7053 OEL - 10 unit
7054 OEL - 25 unit
7055 OEL - 50 unit
7060 OEL - 100 unit
7065 OEL - 200 unit
7091 FICON indicator
7092 High Performance FICON
Note: In China, feature code 7090 is no longer available for hardware machine type 2423.
Parallel access volumes (239x Model LFA, PAV license; 242x machine
type)
The parallel access volumes (PAV) features establish the extent of IBM
authorization for the use of the parallel access volumes licensed function.
Feature codes for parallel access volume
When you order the parallel access volume (PAV) function, you specify the feature
code that represents the physical capacity allowed for the function.
A license is required for the total physical capacity in the storage unit that is
configured as count key data (CKD). The total authorization level must be greater
than or equal to the total physical capacity of the unit.
Table 41 on page 129 provides the feature codes for the PAV function.
Note: If you currently have an active PAV feature, and you replace it with an
inactive feature, “Managing a licensed feature” on page 187 provides
information for future use of the feature.
128 Introduction and Planning Guide
To Next Page
Loading...
Need help?
General