Introduction 5
Features and specifications
1
• Four temperature sensors
• One internal real-time clock
• Requires Fabric OS version 7.0.x or greater
• Managed with Brocade Web Tools
• Supports a minimum of 128 domains in Native mode and Interop mode
• Full fabric switch change to Access Gateway mode
• Nondisruptive code load in Native mode and Access Gateway mode
• 255 N_port logins per physical port
• D_port support on external ports
• Standard FC features (NPIV, E/M/N port types)
• Supports IBM Features on Demand
• Class 2, Class 3, and Class F frames
• SNMP v1, v2, and v3 support
• SSH v2 support
• SSL support
• NTP client support (NTP V3)
• FTP support for firmware upgrades
• SNMP/MIB monitoring functionality contained within the Ethernet Control MIB-II
(RFC1213-MIB)
• UUID put into MIB structure
• End-to-end optics and link validation
• Ability to send switch events and syslogs to the IBM Chassis Management Module (CMM)
• Traps identify cold start, warm start, link up/link down and authentication failure events
• Support for IPv4 and IPv6 on the management ports
Base Model versus ESB Model
Two models of the IBM Flex System FC5022 16Gb SAN Scalable Switch are offered:
• Base Model—Includes 12 active ports, Enhanced Group Management (IBM Network Advisor),
Access Gateway, and Advanced Zoning (Virtual Private SANs). Additional port activation is
available through Features on Demand (FOD).
• ESB Model—Includes 24 licensed ports and the ESB (Enterprise Software Bundle), which
supports functionality noted in the Base Model and includes ISL Trunking, Fabric Watch,
Advanced Performance Monitoring, Adaptive Networking, Extended Fabrics, and Server
Application Optimization (SAO).
To Next Page
Loading...
Need help?
General
