IBM Flex System V7000 Installation Guide

CAUTION:
Electrical current from power, telephone, and communication cables can be
hazardous. To avoid personal injury or equipment damage, disconnect the
attached power cords, telecommunication systems, networks, and modems before
you open the machine covers, unless instructed otherwise in the installation and
configuration procedures. (26)
CAUTION:
The battery is a lithium ion battery. To avoid possible explosions, do not burn.
Exchange only with the approved part. Recycle or discard the battery as
instructed by local regulations. (C007a)
Note: CAUTION: Use safe practices when lifting.
UL regulatory information
This device is for use only with Listed IBM Flex System
™
Enterprise Chassis.
xvi Flex System V7000 Storage Node: Installation Guide

IBM Flex System V7000 Specifications

General

Form Factor	2U
Model	IBM Flex System V7000
Category	Storage
Power Supply	Dual redundant power supplies
Storage Controller	Dual active-active controllers
RAID Levels	RAID 0, 1, 5, 6, 10
Maximum Drives	240
Expansion Enclosures	Up to 9
Drive Types Supported	SSD, HDD
Host Interface Ports	8 Gbps FC
Scalability	Scalable with expansion enclosures
Operating Temperature	5°C to 40°C
Management Interface	Web-based GUI, CLI, SMI-S