Location of HMC (if same as above administrator
address, specify “same”):
Street address
Street address 2
City of locality
State
Postal code
Country or region
Service authorization and connectivity
Select the type of connection to contact your service provider. For a description of these methods
including security characteristics and configuration requirements, see “Deciding which connectivity
method to use for the call-home server” on page 5.
_____ Secure Sockets Layer (SSL) through the Internet
_____ Dialup from the local HMC
_____ Virtual private network (VPN) through the Internet
Secure Sockets Layer (SSL) through the Internet:
If you have an existing Internet connection from your HMC, you can use it to call your service
provider. You can connect directly to your service provider by using encrypted Secure Sockets
Layer (SSL) using the existing Internet connection. select Use SSL Proxy if you want to configure
the use of encrypted SSL using an indirect connection using an SSL Proxy.
Use SSL proxy? (yes/no)
If yes, list information below:
Address:
Port:
Authenticate with the SSL
Proxy?
If yes, list information below:
User:
Password:
Internet connection Protocol used
For more information about the different Internet Protocols, see “Choosing an Internet Protocol”
on page 7.
___ IPv4
___ IPv6
___ IPv4 and IPv6
Dial-up from the local HMC
Enter the dial-up information to configure your local modem. Specify which telephone numbers
to use to dial your service provider. When you are connecting, the telephone numbers will be
dialed in the order in which they are listed.
Dial prefix: ________________
Installing and configuring the Hardware Management Console 21
To Next Page
Loading...
Need help?
General
