IBM Power 750 - Page 23

Chapter 1. General description 9
򐂰 One hot-plug, slim-line SATA media bay per system
򐂰 Redundant hot-swap 1,925 Watts AC power supplies
򐂰 Choice of Integrated Multifunction Card options (maximum one per system):
– Dual 10 Gb Copper and Dual 1 Gb Ethernet (FC 1768)
– Dual 10 Gb Optical and Dual 1 Gb Ethernet (FC 1769)
– Dual 10 Gb Optical and Dual 1/10 Gb (RJ45) Ethernet (FC EN11)
– Dual 10 Gb Copper and Dual 1/10 Gb (RJ45) Ethernet (FC EN10)
򐂰 One serial port on the Integrated Multifunction Card
򐂰 Two USB ports on the Integrated Multifunction Card plus another USB port on the base
system unit
򐂰 DASD and Media Backplane with 6 x 2.5-inch DASD or SSD (FC EPTS):
– One to six SFF SAS DASD or SSDs (mixing allowed)
– Two integrated SAS controllers to run the SAS bays
– One slim bay for a DVD-RAM (required)
– One integrated SATA controller to run the DVD-RAM
򐂰 Eight I/O expansion slots per system
– Six Gen2 PCIe 8x slots plus two GX++ slots
򐂰 Two HMC ports
򐂰 Permanent Processor CUoD
򐂰 PowerVM (optional)
– Micro-Partitioning
– Virtual I/O Server (VIOS)
– Automated CPU and memory reconfiguration support for dedicated and shared
processor logical partition (LPAR) groups
– PowerVM Live Partition Mobility (requires PowerVM Enterprise Edition)
򐂰 12X I/O drawers with PCIe slots for 24-core or larger Power 760:
– Up to four PCIe I/O drawers (FC 5802 or FC 5877)
򐂰 Disk-only I/O drawers
– Up to two EXP30 Ultra SSD I/O drawers with integrated, high performance, SAS
controllers (FC EDR1)
– Up to 51 EXP24S SFF SAS I/O drawers (FC 5887) on SAS PCIe controller (optionally
one of the 51 drawers can be attached to the external SAS port of the system unit)
– Up to 27 EXP12S 3.5-inch SAS I/O drawers (FC 5886) on SAS PCIe controllers