Weight and physical dimensions
Table 12 lists the weight and physical dimensions of the SAN16B-2.
Table 12. Switch specifications
Dimension Value
Height 1U = 4.29 cm (1.69 in.)
Width 42.85 cm (16.87 in.)
Depth 30.734 cm (12.10 in.)
Weight 4.0 kg (8.8 lb)
Memory specifications
The switch memory specifications are listed in Table 13.
Table 13. Memory specifications
Memory type Installed Memory
Main memory (SDRAM) 128 MB
Compact flash 256 MB
System general specifications
Table 14 lists the system specifications for the SAN16B-2 switch.
Table 14. General specifications
Specification Descriptions
Auto-configuring port types F_Port, FL_Port, and E_Port
System architecture Nonblocking shared-memory switch
System processor PowerPC440GP, 333 MHz CPU
ANSI Fibre-channel protocol FC-PH (Fibre Channel Physical and
Signalling Interface standard)
Modes of operation Fibre Channel Class 2, Class 3, Class F
Fabric initialization Complies with FC–SW–2 6.6
Ethernet port One 10/100 Mbit/sec Ethernet port; accessed
through RJ45 connector
Terminal port One UART interface for terminal, accessed
through DB9 connector
ASIC Goldeneye ASIC for Fibre Channel Switching
FC-IP (IP over Fibre Channel) Complies with FC-IP 2.3 of FCA profile
Aggregate switch I/O bandwidth 128 Gb/sec if all 16 ports running at 4
Gb/sec, full duplex
Port-to-port latency Less than 2 microseconds with no contention
(destination port is free)
Appendix A. Product specifications 39
To Next Page
Loading...
