DANGER: Hazardous voltage, current, or energy levels are present inside
any component that has this label attached. Do not open any cover or
barrier that contains this label. (L001)
DANGER: Rack-mounted devices are not to be used as a shelf or work
space. (L002)
DANGER: Multiple power cords. The product might be equipped with
multiple power cords. To remove all hazardous voltages, disconnect all
power cords. (L003)
DANGER: Hazardous voltage present. Voltages present constitute a shock
hazard, which can cause severe injury or death. (L004)
CAUTION: Hazardous moving parts nearby. (L008)
Attention notices
An attention notice indicates the possibility of damage to a program, device, or system, or to data. An
exclamation point symbol may accompany an attention notice, but is not required. A sample attention
notice follows:
Attention:
Do not bend a bre cable to a radius less than 5 cm (2 in.); you can damage the cable.
Tie wraps are not recommended for optical cables because they can be easily overtightened,
causing damage to the cable.
Safety and environmental notices xix
To Next Page
Loading...
