Appendix A. Product specications
This topic provides the specications for the SAN64B-6 switch.
• “System specications” on page 81
• “Fibre Channel” on page 82
• “LEDs” on page 82
• “Weight and physical dimensions” on page 83
• “Environmental requirements” on page 83
• “Power supply specications (per PSU)” on page 84
• “Data port specications (Fibre Channel)” on page 85
• “Serial port specications (pinout RJ-45)” on page 86
• “Memory specications” on page 87
• “Regulatory compliance (EMC)” on page 87
• “Regulatory compliance (safety)” on page 87
• “Regulatory compliance (environmental)” on page 87
System specications
System component
Description
Enclosure 1U, nonport-side front-to-back exhaust airflow, power from back
Power inlet C14
Power supplies Dual, hot-swappable redundant power supplies with integrated system
cooling fans
Fans Three fans per power supply and fan assembly unit
Cooling Port side to the nonport-side of the switch (nonport-side exhaust) and
nonport-side to the port side (port-side exhaust)
System architecture Nonblocking shared memory switch
System processors Freescale T1022 CPU
Port-to-port latency < 70 nanoseconds with no contention (destination port is free)
©
Copyright IBM Corp. 2016, 2020 81
To Next Page
Loading...
Need help?
General