IBM SAN64B-6 User Manual

Pin Signal Description
8 Not supported N/A
Note: These specications are for connector on IBM platform only.
Serial port specications (protocol)
Parameter Value
Baud 9600
Data bits 8
Parity None
Flow control None
Stop bits 1
Memory specications
Memory Type Size
Main Memory DDR3L SDRAM with 8-bit ECC, SORDIMM
package, operating at 1200 MT/s
2 GB, 64-bit
Boot Flash Parallel NOR flash embedded memory 16 MB
eUSB Module - 2 GB
Regulatory compliance (EMC)
• FCC Part 15, Subpart B (Class A)
• EN 55022 (CE mark) (Class A)
• EN 55024 (CE mark) (Immunity) for Information Technology Equipment
• ICES-003 (Canada) (Class A)
• AS/NZ 55022 (Australia) (Class A)
• VCCI (Japan) (Class A)
• EN 61000-3-2
• EN 61000-3-3
• EN 61000-6-1
Regulatory compliance (safety)
• CAN/CSA-C22.2 No. 60950/UL 60950
• EN 60825 Safety of Laser Products
• EN 60950/IEC 60950 Safety of Information Technology Equipment
Regulatory compliance (environmental)
• 2014/35/EU and 2014/30/EU
Appendix A. Product
specications 87

IBM SAN64B-6 Specifications

General

Brand	IBM
Model	SAN64B-6
Category	Switch
Language	English