IBM Storwize V7000 2076-324 User Manual

7. See Figure 10 on page 63 for an example of status when there is no mirror.
If mirroring is not enabled, the output under Mirror Information displays a
message that says: The mirror is not created/configured.
If the mirror is not created, refer to “Troubleshooting the System x3650” in the
IBM Storwize V7000 Unified Information Center for information on launching the
LSI configuration tool.
Target on ID #5
Device is a Hard disk
Enclosure # : 1
Slot # : 1
Connector ID : 1
Target ID : 5
State : Out of Sync (OSY) <---
Size (in MB)/(in sectors) : 286102/585937500
Manufacturer : IBM-ESXS
Model Number : XXXXXXXXXXXX
Firmware Revision : XXXX
Serial No : XXXXXXXXXXXXXXXXXXXX
Drive Type : SAS
Protocol : SAS
Error Information
SMART Error Count : none
SMART ASC : none
SMART ASCQ : none
Figure 9. Example that shows that a drive is not synchronized
62 Storwize V7000 Unified: Problem Determination Guide Version

IBM Storwize V7000 2076-324 Specifications

General

RAID Levels	RAID 0, 1, 5, 6, 10
Maximum Drives Supported	504
Drive Bays	24
Product Type	Storage system
Form Factor	2U
Drive Type Supported	SAS, NL-SAS, SSD
Host Interfaces	8 Gbps Fibre Channel, 1 Gbps iSCSI, 10 Gbps iSCSI
Cache Memory	32 GB
Operating System	IBM SAN Volume Controller