Table 6. Hardware locations of Storwize V7000 Unified enclosures and other devices (continued)
EIA 14
EIA 13
EIA 12
EIA 11
EIA 10
EIA 9
EIA 8
EIA 7
EIA 6
EIA 5
EIA 4
EIA 3
EIA 2
EIA 1
A volume storage system is a collection of control enclosures that are managed as a
single system. Each control enclosure contains two node canisters. The two node
canisters within the control enclosure form the node pair that attaches to the SAN
fabric.
The components of your system might include the storage enclosures listed in
Table 7.
Table 7. Storwize V7000 Unified hardware location requirements
Device
Machine type
and model
Number of EIA
units required Notes
Control enclosure
(Gen 2)
2076-524 2 24 disk drive slots; dual power supplies; optional 4 port
10 Gbps Ethernet card in expansion slot 3 or additional 4
port 8 Gbps fibre channel card.
Expansion enclosure
(Gen 2)
2076-12F 2 12 disk drive slots; dual power supplies
Expansion enclosure
(Gen 2)
2076-24F 2 24 disk drive slots; dual power supplies
Control enclosure 2076-112 2 12 disk drive slots; dual power supplies
Control enclosure 2076-124 2 24 disk drive slots; dual power supplies
Expansion enclosure 2076-212 2 12 disk drive slots; dual power supplies
Expansion enclosure 2076-224 2 24 disk drive slots; dual power supplies
Control enclosure 2076-312 2 12 disk drive slots; dual power supplies; 10 Gbps
Ethernet card in expansion slot
Control enclosure 2076-324 2 24 disk drive slots; dual power supplies; 10 Gbps
Ethernet card in expansion slot
File module 2073-700 2 Each of the two file modules is 2 EIA units; each file
module has either eight 1 Gbps Ethernet ports or four 10
Gbps Ethernet ports
10 IBM Storwize V7000 Unified: Adding Storwize V7000 File Modules to an existing Storwize V7000 system 2073-720
To Next Page
Loading...
Need help?
General
