– Light path diagnostics status
– Service processor status and configuration
– Vital product data, firmware, and UEFI configuration
– Hard disk drive health
– RAID adapter configuration
– Event logs for service processors
The DSA program creates a chronologically ordered merged of the system-event
log (as the IPMI event log), the IMM event log (as the ASM event log), and the
operating-system event logs. The information is collected into a file that you can
send to IBM service and support. Additionally, you can view the information
locally through a generated text report file. You can also copy the log to a
removable media and view the log from a Web browser.
For additional information about the DSA program, see the Problem
Determination and Service Guide on the IBM Documentation CD
v IBM Systems Director
IBM Systems Director is a workgroup-hardware-management tool that you can
use to centrally manage System x and xSeries
®
servers. For more information,
see the IBM Systems Director documentation on the IBM Systems Director CD.
v IBM ServerGuide Setup and Installation CD
The ServerGuide Setup and Installation CD, which you can download from the
Web, provides programs to help you set up the server and install a Windows
operating system. The ServerGuide program detects installed optional hardware
devices and provides the correct configuration programs and device drivers. For
more information about the ServerGuide Setup and Installation CD, see “Using
the ServerGuide Setup and Installation CD” on page 109.
v IBM X-Architecture
®
technology
IBM X-Architecture technology combines proven, innovative IBM designs to make
your Intel-processor-based server powerful, scalable, and reliable. For more
information, see http://www.ibm.com/servers/eserver/xseries/xarchitecture/
enterprise/index.html.
– VMware ESXi embedded hypervisor
The VMware ESXi embedded hypervisor is available on some server models.
Hypervisor is virtualization software that enables multiple operating systems to
run on a host system at the same time. The VMware ESXi embedded
hypervisor software is provided on USB flash device that is installed in the
USB connector on the system board. See “Using the embedded hypervisor”
on page 113 for additional information.
– Active Memory
™
The Active Memory feature improves the reliability of memory through memory
mirroring or memory sparing. Memory mirroring stores data in two pairs of
DIMMs simultaneously. Memory sparing mode, one channel is a spare of the
other two.
– Large system-memory capacity
The memory bus supports up to 128 GB of system memory using RDIMMs.
The memory controller supports error correcting code (ECC) for up to 16
industry-standard PC3-10600R-999 (single-rank or dual-rank DIMMs), 800,
1067, and 1333 MHz, DDR3 (third-generation double-data-rate), registered,
synchronous dynamic random access memory (SDRAM) dual inline memory
modules (DIMMs). The memory bus also supports up to 48 GB system
memory using UDIMMs.
v Integrated network support
10 IBM System x3400 M3 Types 7378 and 7379: Installation and User's Guide
To Next Page
Loading...
Need help?
General
