Using a Supervisor Password
Changing or Removing the Supervisor Password when Using
Several Hard Disk Drives:
To change or remove the supervisor password when using more
than one hard disk drive on your computer:
To change the supervisor password:
Page 111.
To remove the supervisor password:
Page 113.
To install the hard disk password:
Page 132.
1
Change or remove your supervisor password on your
computer.
2
In the main hard disk drive bay, install the hard disk drive that
has the old supervisor password set.
3
Turn on the computer. The hard disk password prompt
appears.
4
Do one of the following:
If you removed the supervisor password
in step 1, type the
old supervisor password; then press the Spacebar.
If you changed the supervisor password
in step 1, change
the old password on the hard disk drive to the new
supervisor password:
a) Type your
old
password and press the Spacebar.
b) Type your
new
password and press the Spacebar.
c) Type your
new
password again.
5
Press Enter.
6
Turn off the computer. Repeat steps 2 through 5 to change or
remove the supervisor password for each hard disk drive.
Chapter 5. Protecting Your Computer 115
To Next Page
Loading...
Need help?
General