IBM ThinkPad 760ED Instruction Manual

Attaching an External Monitor
Attaching an External Monitor
To install the display driver:
Chapter 7.
Attention:
When you select Both , do not attach
an external monitor that supports
only VGA mode (640-by-480
resolution). Otherwise, the screen
size looks smaller, or the external
monitor screen will be scrambled and
the output will not be displayed (or
the screen might be damaged).
Note:
When installing an operating system,
you must install the ThinkPad display
driver before you can use an external
monitor.
To attach an external monitor:
1 Change the display output type (where to display the computer
output) as follows so that you can see the computer output on
the external monitor:
a) Start the ThinkPad Features program.
b) Click on each of the following icons:
The CRT (
) icon to display information on the
external monitor.
The Both (
) icon to display information on both the
LCD and external monitor.
(The LCD (
) icon to display information on the
LCD.)
2 Set the monitor type and the display driver:
Note:
You can use the Fn key function
(Fn+F7) or PS2 SC command to
change the display output type.
a) Click on the Display (
or ) icon in the ThinkPad
Features program.
42
IBM ThinkPad 760E, 760ED, or 760EL User's Guide

IBM ThinkPad 760ED Specifications

General

Brand	IBM
Model	ThinkPad 760ED
Category	Laptop
Language	English