Troubleshooting
Screen Message and Its
Meaning
Action
16
x
or 17
x
(Undefined date or
configuration error)
Follow the instructions on the screen.
174
(Device configuration
error)
There is a device configuration error.
Check that the hard disk drive and the device in the UltraBay are installed firmly
in the connectors.
184
(Invalid password error)
The entered password is invalid. Turn off the computer and wait at least 5
seconds; then turn it on again and type the correct password.
190
(Critical low-battery error)
The computer has turned off because of a critical low-battery condition.
Connect the AC Adapter to the computer and charge the battery pack, or
replace the battery pack with the fully charged one.
195
(Hibernation error)
The system configuration before and after hibernation mode differs, and the
computer cannot resume normal operation.
Change the system configuration to what it was before the computer entered
hibernation mode.
If the memory size is changed, re-create the hibernation file (see page 98).
196
(Hibernation error)
The computer cannot read the hibernation file.
Have the computer serviced.
2
xx
(Memory error)
Verify that the DIMM option is correctly installed.
Chapter 8. Solving Computer Problems 237
To Next Page
Loading...
Need help?
General