How to Attach a Television to the Computer
Displaying Output on the External SVGA Monitor
Note
You can attach both a television and an SVGA monitor to the
computer; however, you can display the computer output on only
one of the two at the same time. To switch between those two,
you need to use the ThinkPad Features program.
To display computer output on the attached external SVGA monitor
after using the television, do the following:
1
Turn off the computer and attach the SVGA monitor to the
external-monitor connector at the rear of the computer.
2
Turn on the computer and start the ThinkPad Features
program.
3
Click on the CRT ( ) icon; then click on Enable External
Display.
64 IBM ThinkPad 760E, 760ED, or 760EL User's Guide
To Next Page
Loading...
