Biotech-Lab User Manual \\ 8www.ibpmedical.com
3 Biotech-Lab Modules
For the Biotech-Lab System a range of interface modules are available. The general groups are:
• HDU - Sensors and Interfaces
• HSI - Simulators
• HAT - Analyser & Tester
Some modules listed below are under development.
If you have special needs please do not hesitate to contact us.
3.1.1 HDU - SENSORS AND INTERFACES
HDU-Sensors are a product family of high precision active sensors for biomedical, laboratory and environmental
applications.
HDU-CDTP Conductivity/Temperature sensor
HDU-PRH High Accuracy Pressure Sensor Family
HDU-PRS Pressure Sensor Family
HDU-FL Flow Sensor Family
HDU-Pt100-I Interface for Pt100 temperature sensors
Available versions depending on the requirements:
Temperature Sensor Family: Air - Surface - General - Dip
HDU-YSI400-I Interface for YSI 400 temperature sensors
HDU-pH-I Interface for pH-Sensor
3.1.2 HSI - SIMULATORS
HDS-Sources and HVS-Simulators are a product family voltage and pressure sources and Vital Signs Simulators for
biomedical, laboratory and environmental applications.
HSI-PSG16 Pressure Sensor and Source -400 to +750 mmHg for:
Static NIBP Monitor test
Static Pressure and Linearity Test
Pressure Leak Test
Over Pressure Test
HSI-ECG Patient Simulator 12 Lead ECG-Signals
HSI-YSI400 Simulator YSI 400 Temperature Sensors
HSI-IBP Simulator Invasive Blood Pressure Sensor
3.1.3 HAT - ANALYSER AND TESTER
HAT- Analyser and Tester include
HAT-ESA Medical Electrical Safety Analyser
HAT-IPA Infusion Pump Analyser
To Next Page
Loading...