Iceco JP42 - Battery Protection Mode; Battery Protection Level; Defrosting; Cleaning and Maintenance

VOLTAGE
DISPLAY
12V 24V
PROTECTION
POSITION
LOW
1 Bar
9.6 10.9 21.3 22.6
MIDDLE
2 Bars
10.4 11.7 22.8 24.1
HIGH
3 Bars
11.1 12.4 24.3 25.6
5
Battery Protection Level
BATTERY PROTECTION MODE
In the standby status, long press “on/off” and “setting” button at the same time for 3 seconds
to enter the battery protection setting menu. Press + and – to adjust the level, “- - “ refer to
the low mode, “= =” refer to the middle mode, and “≡ ≡” refer to the high mode.
Defrost the appliance in regular time can maintain the appliance.
Notice: Do not use hard or sharp tools to remove the ice or frost which attach to the box.
To defrost the freezer, please follow up:
● Disconnect the power.
● Take out the goods of the portable freezer.
● Leave the lid open.
● Open the scupper and drain away the defrosted water.
Cleaning and maintenance
● Please disconnect the appliance from the power supply before you clean it.
● Do not clean the appliance under running water or in dish water.
DEFROSTING