Why is the temperature displayed on my ICM Controls SC 2000 not accurate?
If the temperature displayed on your ICM Controls Thermostat isn't accurate, ensure the thermostat is set to your preferred temperature readout (Fahrenheit or Celsius) using the jumper setting. Also, seal the wiring hole behind the thermostat with non-flammable insulation to block airflow.
What to do if my ICM Controls SC 2000 Thermostat is not properly controlling the fan?
If your ICM Controls Thermostat isn't properly controlling the fan, ensure the fan switch setting corresponds to your system type (gas or electric).
How to stop my ICM Controls SC 2000 Thermostat from continuously turning on and off?
If your ICM Controls Thermostat is continuously turning on and off, try increasing the temperature differential.
What to do if the LCD is blank or displaying 'LO BAT' on my ICM Controls Thermostat?
If the LCD screen of your ICM Controls Thermostat is blank or displaying “LO BAT”, replace the batteries. Alternatively, ensure the existing batteries are correctly installed.
How to fix ICM Controls SC 2000 Thermostat when the system isn’t turning on?
If your ICM Controls Thermostat system isn’t turning on, check the wiring and inspect the batteries.
Crucial guidelines for safe operation and installation of the thermostat.
Adjusting the thermostat to the desired comfort level.
Modifying the temperature swing to optimize system cycling.
General| Programmability | 7-Day Programmable |
|---|---|
| Control Type | Digital |
| Backlight | Yes |
| Display | Digital |
| Power Source | 24 VAC |
| Battery | 2 AA (Backup) |
To Next Page