ICM Controls SC 2001 - User Manual

Manual Changeover
Non-Programmable
Hardwired
SC 2001
Non-Programmable Electronic Thermostat
Installation, Operation & Application Guide
For more information on our complete range of American-made
products – plus wiring diagrams, troubleshooting tips and more,
visit us at www.icmcontrols.com
• Controls Single Stage Heating/Cooling Systems
• Single Stage Heat Pump Systems
• Compatible with Gas, Oil or Electric Systems
• 30-Minute Power Loss Memory Retention
• For use with 24 VAC Systems

ICM Controls SC 2001 Specifications

General

Brand	ICM Controls
Model	SC 2001
Category	Thermostat
Language	English

Summary

Parts Diagram

Specifications

Important Safety Information

Always turn off power before installing, removing, cleaning, or servicing the thermostat.

Package Contents and Tools Required

General Description

Details the SimpleComfort® 2001 as a hardwired, digital, mercury-free, non-programmable thermostat.

To Remove Existing Thermostat

To Install Thermostat

Replacing Wiring Labels

Operation

Setting the Room Temperature (Setpoint Temperature)

Adjusts the thermostat's desired room temperature setting for heating or cooling.

Setting a New Temperature Differential

Configures the temperature range for system cycling to prevent frequent on/off cycles.

Changing Fahrenheit to Celsius

Instructions to switch the temperature display between Fahrenheit and Celsius units.

Starting the Thermostat

Steps to set the fan and mode switches to begin thermostat operation.

A Quick Test

Wiring Diagrams

Troubleshooting

ONE-YEAR LIMITED WARRANTY