EasyManua.ls Logo

ICM Controls SC 3801 - Specifications; Important Safety Information

ICM Controls SC 3801
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
Electrical rating: 24 VAC (18-30 VAC)
1 amp maximum per terminal
4 amp maximum total load
Temperature control range: 45°F to 90°F (7°C to 32°C) Accuracy: ± 1°F (± 0.5°C)
System configurations: 2-stage heat, 2-stage cool, heat pump, gas, oil, electric
Terminations: R, C, W1/O/B, Y1, W2, Y2, G, S1, S2
Specications
WARNING!
: Always turn off power at the main power supply before installing, cleaning, or removing
thermostat.
This thermostat is for 24 VAC applications only; do not use on voltages over 30 VAC
Do not short across terminals of gas valve or system control to test operation; this will damage your
thermostat and void your warranty
All wiring must conform to local and national electrical and building codes
Do not use air conditioning when the outdoor temperature is below 50 degrees; this can damage your
A/C system and cause personal injuries
Use this thermostat only as described in this manual
Important Safety Information
Package includes: SimpleComfort
®
3801 programmable thermostat on base, labeled thermostat cover,
wiring labels, screws and wall anchors, Owner’s Manual, Installation, Operation and
Application Guide.
Tools required for installation: Drill with 3/16” bit, hammer, screwdriver.
Package Contents/Tools Required

Other manuals for ICM Controls SC 3801

Related product manuals