79
8
SCAN OPERATION
■ Skip channel setting
The memory skip function speeds up scanning by checking
only those memory channels not set as skip channels. Set
skip channels as follows.
qSelect a memory channel in the desired band
(Left or Right):
➥ Push the desired band’s [M/CALL•MW] to select mem-
ory mode.
➥ Rotate the same band’s [DIAL] to select the desired
channel to be a skip channel.
wPush [F•]to display the function guide.
ePush [SKIP](TONE•DTMF) to select the skip condition
from “≈,” “P≈” or “OFF
(no indication)” for the selected chan-
nel.
•“≈” (SKIP) : The channel is skipped during memory or bank
scan.
•“P≈” (PSKIP): The channel is skipped during memory/bank scan
and the programmed scan.
•“__” (OFF) : The channel is scanned during any scan.
rPush [F•]once or twice to exit the function guide indi-
cation.
To Next Page
Loading...
