106
14
MENU SCREEN OPERATION
1
2
3
4
5
6
7
8
9
10
11
14
13
14
15
16
17
18
19
■ DUP/ TONE items
DD
Offset frequency
Sets the duplex offset frequency from 0 to 159.995 MHz. Dur-
ing duplex (repeater) operation, transmit frequency shifts the
set frequency.
(default value may differ depending on operating fre-
quency band and versions)
• Push [MHz](V/MHz•SCAN) (Left band’s) to tune in 1 MHz steps.
DD
Repeater tone
Sets subaudible tone frequency (encoder only) for repeater op-
eration. Total of 50 tone frequencies
(67.0–254.1 Hz) are avail-
able.
(default: 88.5 Hz)
DD
CTCSS tone
Sets subaudible tone frequency (both encoder and decoder) for
tone squelch operation. Total of 50 tone frequencies
(67.0–254.1 Hz) are available. (default: 88.5 Hz)
•Available subaudible tone frequencies
DD
DTCS code
Sets DTCS code (both encoder and decoder) for DTCS squelch
operation. Total of 104 codes are available.
(default: 023)
•Available DTCS codes
DD
DTCS polarity
Sets DTCS polarities for transmission and reception from
“BOTH N,” “TN-RR,” “TR-RN” and “BOTH R”
(default: BOTH N)
DD
Weather alert function
Turns weather alert function ON and OFF (default).
See p. 123 for details.
USA version only
To Next Page
Loading...
