XIV
QUICK REFERENCE GUIDE
Using the HM-133
qPush [MR/CALL] to select memory mode.
wPush [
ENT
C(T-OFF)] first, then enter the desired memory
channel via the keypad.
ePush [VFO/LOCK] to select VFO mode, then set the de-
sired operating frequency, including offset direction, tone
settings, etc.
➥ Push [VFO/LOCK] to select VFO.
➥ Push [
ENT
C(T-OFF)] first, then enter the desired oper-
ating frequency via the keypad.
• Set other data, such as repeater tone, duplex information, tun-
ing step, if necessary.
rPush [FUNC] then push and hold [
CLR
A(MW)] for 1 sec.
to program.
•3 beeps sound
• Memory channel number automatically increases when continu-
ing to push [
CLR
A(MW)] after programming.
To Next Page
Loading...
