EasyManua.ls Logo

Icom IC-706MKIIG

Icom IC-706MKIIG
75 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AACCCC SSOOCCKKEETT
WWhheenn ccoonnnneeccttiinngg tthhee AACCCC ccoonnvveerrssiioonn ccaabbllee ((OOPPCC--559999))
6
1
PANEL DESCRIPTION
!3
BBEEEEPP//SSIIDDEETTOONNEE CCOONNTTRROOLL [[BBEEEEPP//SSIIDDEETTOONNEE]]
Adjusts the beep tone and CW side tone audio lev-
els.
TECHNICAL INFORMATION
AACCCC PPIINN ## NNAAMMEE DDEESSCCRRIIPPTTIIOONN SSPPEECCIIFFIICCAATTIIOONNSS
CCOOLLOORR
1 8 V Regulated 8 V output.
Output voltage : 8 V ±0.3 V
Output current : Less than 10 mA
brown
2 GND Connects to ground. red
3 HSEND
Input/output pin (HF/50 MHz).
Goes to ground when transmitting.
When grounded, transmits (connected to 8V
line thru 2.2 k resistance/144 MHz operation)
.
Ground level : 0.5 V to 0.8 V
Input current : Less than 20 mA
(HF/50 MHz bands)
orange
4 BDT Data line for the optional AT-180. yellow
5 BAND
Band voltage output.
(Varies with amateur band)
Output voltage : 0 to 8.0 V green
6 ALC ALC voltage input.
Control voltage : 4 to 0 V
Input impedance : More than 10 k
blue
7 VSEND
Input/output pin (144 MHz).
Goes to ground when transmitting.
When grounded, transmits
(connected to 8V
line thru 2.2 k resistance/HF50 MHz operation)
.
Ground level : 0.5 V to 0.8 V
Input current : Less than 20 mA
(144 MHz band)
purple
8 13.8 V 13.8 V output when power is ON. Output current :Max. 1 A gray
9 TKEY Key line for the AT-180. white
10 FSKK
RTTY keying input.
Connected in parallel to the [RTTY] jack.
Ground level : 0.5 to 0.8 V
Input current : Less than 10 mA
black
11 MOD Modulator input.
Input impedance : 10 k
Input level : Approx. 100 mV
rms
pink
12 AF
AF detector output.
Fixed, regardless of [AF] position.
Output impedance : 4.7 k
Output level : 100 to 350 mV rms
light
blue
13 SQLS
Squelch output.
Goes to ground when squelch opens.
SQL open : Less than 0.3 V/5 mA
SQL closed : More than 6.0 V/100 µ A
light
green
Rear panel
view
1234
8765
9
10 11 12
13
Color refers to the
cable strands of the
supplied cable.
ACC 1
ACC 2
FSKK AF
GND SQLS
HSEND 13.8 V
MOD ALC
8 V ALC
GND VSEND
HSEND 13.8 V
BAND
1
1
2
2
3
3
4
4
8
8
7
7
6
6
5
5
9
10 11 12
13
1
2
3
4
76
5
IC-706MKIIG.qxd 02.3.27 13:53 Page 6

Table of Contents

Other manuals for Icom IC-706MKIIG

Related product manuals