Icom IC-7300 - Others; SD Card; Time Set

12
SET MODE
12-11
Time Set
Date (Default: 2000/01/01)
Sets the date (Year/Month/Day).
(The day of the week is automatically set.)
• Range: Year 2000 ~ 2099, Month/Day 1-1 ~ 12-31
Time (Default: 0:00)
Sets the current time.
(The time is displayed in the 24 hour format.)
• Sets the current time.
UTC Offset (Default: ± 0:00)
Sets the UTC offset time.
• Range: –14:00 to +14:00 (in 5 minute steps)
SD Card
Load Setting
Selects the saved data le to load.
L See “Loading the saved data les onto an SD card”
(p. 8-6) for details.
Save Setting
Saves the setting data onto an SD card.
L See “Saving the setting data onto an SD card”
(p. 8-4) for details.
SD Card Info
Displays the SD card capacity and the time remaining
for voice recording.
L See “Displaying the information” (p. 8-7) for details.
Screen Capture View
Displays the selected screen capture.
L See “Screen Capture function” (p. 13-5) for details.
Firmware Update
Displays the Firmware Update mode.
L See “Updating the rmware” (p. 15-5) for details.
Format
Formats the SD card.
If you use a brand new SD card, be sure to format it.
L See “Formatting an SD card” (p. 8-3) for details.
Unmount
Unmounts the SD card.
Before you remove a card when the transceiver is ON,
be sure to electrically unmount it.
Otherwise the data may be corrupted or deleted.
L See “Unmounting an SD card” (p. 8-3) for details.
Others
Version
Displays the transceiver rmware’s version number.
Touch Screen Calibration
Touch to adjust the touch screen.
L See “Touch screen calibration function” (p. 14-3) for
details.
Partial Reset
Resets operating settings to their default values (VFO
frequency, VFO settings, menu contents) without
clearing the items below:
• Memory channel contents
• MY Call
• Memory Keyer
• RTTY memory
• User Band Edge
• REF Adjust
• Fixed Edges
L See “Resetting” (p. 14-4) for details.
All Reset
Clears all data and returns all settings to their factory
defaults.
Memory channel contents, lter setting and so on
will all be cleared, so you will need to rewrite your
operating settings.
L See “Resetting” (p. 14-4) for details.
Emergency
Sets the Emergency function.
This function enables you to use the internal antenna
tuner in an emergency situation, but limits the
maximum output power to 50 W.
L See “Emergency mode (Tuner)” (p. 11-4) for details.