Icom IC-7300 - Touch Screen Calibration Function

14-3
MAINTENANCE
14
Touch screen calibration function
When no screen action occurs, or a different function
is activated after touching the screen, the touched
point and the detected range may be different.
In that case, the Touch screen calibration function
helps to correct the touch screen sensing
performance.
1. Open the OTHERS screen.
MENU
» SET > Others
2. Touch “Touch Screen Calibration.”
• A dot is displayed on the screen.
3. Touch the dot on the screen.
• A new dot is displayed in another position.
4. Repeat step 2.
L When the calibration is completed, the transceiver
returns to the OTHERS screen.
dot