EasyManua.ls Logo

Icom IC-7300 - Page 148

Icom IC-7300
173 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17-2
17
OPTIONS
Options
IC-PW1/IC-PW1EURO linear amplifier
HF/50 MHz all band 1 kW linear amplier including an
automatic antenna tuner. An optional OPC-599 is required
for the connection.
SM-50
desktop microphone
Dynamic microphone with
[UP]/[DOWN] switches.
HM-36 microphone
Hand microphone with
[UP]/[DOWN] switches.
SM-30
desktop microphone
Desktop microphone
with a low frequency cut
function.
PS-126
dc power supply
Output voltage: 13.8 V DC
Maximum output current:
25 A
SP-23
external speaker
External speaker with high
and low frequency cut
functions.
CT-17 ci-v converter
For remote transceiver
control using a PC
equipped with an
RS-232C port.
SP-34
external speaker
External speaker with high
and low frequency cut
functions.
AH-2b
antenna element
A 2.5 m (8.2 ft)
long antenna
element for mobile
operation with the
AH-4.
AH-4 antenna tuner
Automatic antenna
tuner to tune a long
wire antenna for base,
portable, or mobile
HF/50 MHz operation.
Approved Icom optional equipment is designed
for optimal performance when used with an Icom
transceiver. Icom is not responsible for the destruction
or damage to an Icom transceiver in the event the
Icom transceiver is used with equipment that is not
manufactured or approved by Icom.
AH-740
automatic
tuning antenna
High performance,
automatic high-speed
tuning antenna.
The optional AH-5NV
nvis kit is available.
AH-5NV nvis kit
Use with the AH-740.
AH-710 folded dipole antenna
Covers 2 to 30 MHz wide frequency range.
Element length: 24.5 m (80.4 ft)
Coaxial cable (supplied): 30 m (98.4 ft)
HM-219 microphone
The same as supplied.
MB-118 mounting bracket
To mount the transceiver inside a vehicle.
MB-123 carrying handle
OPC-420 control cable
A 10 m (32.8 ft) shielded control cable for the AH-4.
OPC-599 adapter cable
13-pin ACC connector adaptor to 7-pin + 8-pin ACC
connectors.
RS-BA1 ip remote control software
NOTE: To remotely control transceivers using the
RS-BA1, BE SURE to comply with your local regulations.
SP-33 external speaker
Designed for base station operation.
SP-35 external speaker
Designed for mobile operation.

Table of Contents

Other manuals for Icom IC-7300

Related product manuals