Icom IC-78

9
3
INSTALLATION AND CONNECTIONS
n Required connections
PWR
MICROPHONES (p. 45)
SM-20
or SM-6
HM-36
GROUND (p. 8)
Use the heaviest gauge wire
or strap available and make
the connection as short as
possible.
Grounding prevents electrical
shocks, TVI and other prob-
lems.
ANTENNA
[Example]: 1.8–30 MHz bands
DC POWER SUPPLY
PS-125
CW KEY
A straight key can be used when the
internal electronic keyer is turned
OFF in “CW PADDL” in initial set
mode. (p. 32)
AH-710
• Front panel
• Rear panel