96
12
MENU SCREEN OPERATION
New2001
■ Set mode items
D Auto power OFF
The transceiver can be set to automatically turn OFF after
a specifi ed time period with a beep when no key operations
are performed.
30 min., 60 min, 90 min, 120 min and OFF
(default) can be
specified. The specified time period is retained even when
the transceiver is turned OFF by the auto power OFF func-
tion. To cancel the function, select “OFF” in this item.
D Power save
The power save function reduces the current drain to con-
serve battery power. This power save function can be turned
OFF, if desired, by turning power ON and OFF.
• “AUTO1” selects “1:4” duty ratio when receiving no signal for 5
sec., then “1:8” 15 sec. after that.
• “AUTO2”
suppresses the consumption of the battery by stopping
the operation of a digital block of the DV mode in addition to the op-
eration of Auto1.
D Attenuator
The attenuator prevents distortion of a desired signal by very
strong RF signals near the desired frequency or when very
strong electric fields, such as from a broadcasting station,
are present at your location.
Select the attenuator function ON and OFF
(default).
OFF
r
NOTE: Power save function is disable when using the
external power supply (More than 10 V DC) or if the Auto
replay function is set to ON or VOICE (☞p. 100).
To Next Page
Loading...
