124
13
OTHER FUNCTIONS
New2001
■ Tone/DTCS squelch
q Set the desired operating frequency, CTCSS tone and
DTCS code.
w Push and hold [TONE](7) for 1 sec. several times to acti-
vate the tone or DTCS squelch.
(TONE, TSQL or DTCS)
• Subaudible tone encoder “TONE,” tone squelch “TSQL,” tone
squelch reverse “TSQL R,” pocket beep “TSQLS,” DTCS
squelch “DTCS,” DTCS squelch reverse “DTCS R,” DTCS beep
“DTCSS” and no tone operation are activated in order.
• Rotating [DIAL] while pushing [TONE](7) also selects the tone
functions.
e Operate the transceiver in the normal way.
r When the received signal includes a matching tone/code,
the squelch opens and the signal can be heard.
• When the received signal’s tone/code does not match, tone/
DTCS squelch does not open, however, the S-indicator shows
signal strength.
• To open the squelch manually, push and hold [SQL].
■ Digital code/digital call sign
squelch
q Set the desired operating frequency on DV mode, Digital
code and MY CALL SIGN.
w Push and hold [DSQ](7) for 1 sec. several times to acti-
vate the digital code or digital call sign squelch. (DSQL or
CSQL)
• Digital call sign squelch “DSQL,” Digital call sign beep
“DSQLS”, Digital code squelch “CSQL,” Digital code beep
“CSQLS” and no tone operation are activated in order.
• Rotating [DIAL] while pushing [DSQ](7) also selects the tone
functions.
e Operate the transceiver in the normal way.
r When the received signal includes a matching call sign/
code, the squelch opens and the signal can be heard.
• When the received signal’s call sign/code does not match, dig-
ital call sign/digital code squelch does not open, however, the
S-indicator shows signal strength.
• To open the squelch manually, push and hold [SQL].
To Next Page
Loading...
