Cmd. Sub cmd. Data Description
1A* 05 0198 00 to 02 SCOPE > Waterfall Speed
(00=Slow, 01=Mid, 02=Fast)
0199 00 to 02 SCOPE > Waterfall Size (Expand Screen)
(00=Small, 01=Mid, 02=Large)
0200 00 to 07 SCOPE > Waterfall Peak Color Level
(00=Grid 1 to 07=Grid 8)
0201 00 or 01 SCOPE > Waterfall Marker Auto-hide
(00=OFF, 01=ON)
0202 See p. 17 SCOPE > Fixed Edges > 144M > No.1:
0203 See p. 17 SCOPE > Fixed Edges > 144M > No.2:
0204 See p. 17 SCOPE > Fixed Edges > 144M > No.3:
0205 See p. 17 SCOPE > Fixed Edges > 430M > No.1:
0206 See p. 17 SCOPE > Fixed Edges > 430M > No.2:
0207 See p. 17 SCOPE > Fixed Edges > 430M > No.3:
0208 See p. 17 SCOPE > Fixed Edges > 1200M > No.1:
0209 See p. 17 SCOPE > Fixed Edges > 1200M > No.2:
0210 See p. 17 SCOPE > Fixed Edges > 1200M > No.3:
0211 00 or 01
AUDIO SCOPE SET >
FFT Scope Waveform Type
(00=Line, 01=Fill)
0212 See p. 16 AUDIO SCOPE SET >
FFT Scope Waveform Color
0213 00 or 01 AUDIO SCOPE SET >
FFT Scope Waterfall Display
(00=OFF, 01=ON)
0214 See p. 16 AUDIO SCOPE SET >
Oscilloscope Waveform Color
0215 0000 ~ 0255 VOICE TX > TX LEVEL
(0000=0%, 0255=100%)
0216 00 or 01 VOICE TX SET > Auto Monitor
(00=OFF, 01=ON)
0217 01 to 15 VOICE TX SET > Repeat Time
(01=1 sec. to 15=15 sec.)
0218 00 to 04 KEYER 001 > Number Style
( 00=Normal, 01=190→ANO, 02=190→ANT,
03=90→NO, 04=90→NT)
0219 01 to 08 KEYER 001 > Count Up Trigger
(01=M1 to 08=M8)
0220 0001 to 9999 KEYER 001 > Present Number
(0001=1 to 9999=9999)
0221 0000 ~ 0255 CW-KEY SET > Side Tone Level
(0000=0% to 0255=100%)
0222 00 or 01 CW-KEY SET > Side Tone Level Limit
(00=OFF, 01=ON)
0223 01 to 60 CW-KEY SET > Keyer Repeat time
(01=1 sec. to 60=60 sec.)
0224 28 to 45 CW-KEY SET > Dot/Dash Ratio
(28=1:1:2.8 to 45=1:1:4.5; 0.1 steps)
0225 00 to 03 CW-KEY SET > Rise Time
(00=2 msec., 01=4 msec., 02=6 msec.,
03=8 msec.)
0226 00 or 01 CW-KEY SET > Paddle Polarity
(00=Normal, 01=Reverse)
0227 00 to 02 CW-KEY SET > Key Type
(00=Straight, 01=Bug, 02=Paddle)
0228 00 or 01 CW-KEY SET > MIC Up/Down Keyer
(00=OFF, 01=ON)
0229 00 to 03 RTTY DECODE SET > FFT Scope Averaging
(00=OFF, 01=2, 02=3, 03=4)
0230 See p. 16 RTTY DECODE SET >
FFT Scope Waveform Color
0231 00 or 01 RTTY DECODE SET > Decode USOS
(00=OFF, 01=ON)
0232 00 or 01
RTTY DECODE SET > Decode New Line Code
(00=CR, LF, CR+LF, 01=CR+LF)
0233 00 or 01 RTTY DECODE SET > TX USOS
(00=OFF, 01=ON)
0234 00 or 01 RTTY DECODE SET >
Displayed Characters during Tx (Satellite)
( 00=Displayed Characters during RX,
01=Displayed Characters during TX)
0235 See p. 16 RTTY DECODE SET > Font Color (Receive)
0236 See p. 16 RTTY DECODE SET > Font Color (Transmit)
0237 00 or 01 RTTY DECODE LOG > Decode Log
(00=OFF, 01=ON)
0238 00 or 01 RTTY DECODE LOG > Log Set > File Type
(00=Text, 01=HTML)
D Command table (Continued)
Cmd. Sub cmd. Data Description
1A* 05 0239 00 or 01 RTTY DECODE SET > Log Set >
Time Stamp
(00=OFF, 01=ON)
0240 00 or 01 RTTY DECODE SET > Log Set >
Time Stamp (Time)
(00=Local, 01=UTC)
0241 00 or 01
RTTY DECODE SET > Log Set >
Time Stamp (Frequency)
(00=OFF, 01=ON)
0242 00 or 01 QSO RECORDER > Recorder Set >
TX REC Audio
(00=Direct, 01=Monitor)
0243 00 or 01 QSO RECORDER > Recorder Set >
RX REC Condition
(00=Always, 01=Squelch Auto)
0244 00 or 01 QSO RECORDER > Recorder Set >
File Split
(00=OFF, 01=ON)
0245 00 or 01 QSO RECORDER > Recorder Set >
REC Operation
( 00=MAIN/SUB Separate,
01=MAIN/SUB Link)
0246 00 or 01 QSO RECORDER > Recorder Set >
PTT Auto REC
(00=OFF, 01=ON)
0247 00 to 03 QSO RECORDER > Recorder Set >
PRE-REC for PTT Auto REC
(00=OFF, 01=5 sec., 02=10 sec., 03=15 sec.)
0248 00 to 03 QSO RECORDER > Player Set > Skip Time
(00=3 sec., 01=5 sec., 02=10 sec., 03=30 sec.)
0249 00 or 01 SCAN SET > SCAN Speed
(00=Slow, 01=Fast)
0250 00 or 01 SCAN SET > SCAN Resume
(00=OFF, 01=ON)
0251 00 to 10 SCAN SET > Pause Timer
( 00=2 sec. to 09=20 sec.; 2 sec. steps,
10=HOLD)
0252 00 to 06 SCAN SET > Resume Timer
(00=0 sec. to 05=5 sec., 06=HOLD)
0253 00 to 04 SCAN SET > Temporary Skip Timer
( 00=5 min., 01=10 min., 02=15 min.,
03=While Scanning, 04=While Powered ON)
0254 00 or 01 SCAN SET > MAIN DIAL Operation (SCAN)
(00=OFF, 01=Up/Down)
0255 00 to 02 GPS > GPS Set > GPS Select
(00=OFF, 01=External GPS, 02=Manual)
0256 00 or 01 GPS > GPS Set > GPS Receiver Baud Rate
( 00=4800bps, 01=9600bps)
0257 See p. 17 GPS > GPS Set > Manual Position
0258 00 to 02 GPS > GPS TX Mode
(00=OFF, 01=D-PRS, 02=NMEA)
0259 See p. 17 GPS > GPS TX Mode > D-PRS >
Unproto Address (Up to 56 characters)
0260 00 to 03 GPS > GPS TX Mode > D-PRS > TX Format
( 00=Position, 01=Object,
02=Item, 03=Weather)
0261 00 to 04 GPS > GPS TX Mode > D-PRS > TX Format >
Position > Symbol
(00=No.1, 01=No.2, 02=No.3, 03=No.4)
0262 See p. 17 GPS > GPS TX Mode > D-PRS >
TX Format > Position >
the GPS-A Symbol No.1 setting (2 characters)
0263 See p. 17 GPS > GPS TX Mode > D-PRS >
TX Format > Position >
the GPS-A Symbol No.2 setting (2 characters)
0264 See p. 17 GPS > GPS TX Mode > D-PRS >
TX Format > Position >
the GPS-A Symbol No.3 setting (2 characters)
0265 See p. 17 GPS > GPS TX Mode > D-PRS >
TX Format > Position >
the GPS-A Symbol No.4 setting (2 characters)
0266 00 to 42 GPS > GPS TX Mode > D-PRS > TX Format >
Position > SSID
( 00=---, 01=(-0), 02=-1 to 16=-15,
17=-A to 42=-Z)
0267 00 to 03 GPS > GPS TX Mode > D-PRS > TX Format >
Position > Comment
( 00=1 to 03=4)
Remote control
9
To Next Page
Loading...
