Cmd. Sub cmd. Data Description
1A* 05 0139
*
1
0000000000
000001 ~
0255025502
550254
SET > Network > DHCP (Valid after Restart)
Read the IP address set by the DHCP server
( 0000000000000001=0.0.0.1 to 0255025502
550254=255.255.255.254)
( When the DHCP setting (Valid after Restart)
is set to OFF, the manually set IP address
(static IP address) is returned.)
0140 01 ~ 30 SET > Network >
Subnet Mask (Valid after Restart)
(01=128.0.0.0 (1 bit) to 30=255.255.255.252
(30 bit))
( Valid when the DHCP (Valid after Restart)
setting is set to OFF.)
0141 0000000000
000001 ~
0255025502
550254, FF
SET > Network >
Default Gateway (Valid after Restart)
( 0000000000000001=0.0.0.1 to 0255025502
550254=255.255.255.254, FF=Blank)
( Valid when the DHCP (Valid after Restart)
setting is set to OFF.)
0142 0000000000
000001 ~
0255025502
550254, FF
SET > Network >
Primary DNS Server (Valid after Restart)
( 0000000000000001=0.0.0.1 to 0255025502
550254=255.255.255.254, FF=Blank)
( Valid when the DHCP (Valid after Restart)
setting is set to OFF.)
0143 0000000000
000001 ~
0255025502
550254, FF
SET > Network >
2nd DNS Server (Valid after Restart)
( 0000000000000001=0.0.0.1 to 0255025502
550254=255.255.255.254, FF=Blank)
( Valid when the DHCP (Valid after Restart)
setting is set to OFF.)
0144 See p. 15 SET > Network > Network Name
(Up to 15 characters)
0145 00 or 01 SET > Network >
Network Control (Valid after Restart)
(00=OFF, 01=ON)
0146 00 or 01 SET > Network >
Power OFF Setting (for Remote Control)
(00=Shutdown only, 01=Standby/Shutdown)
0147 000001 ~
065535
SET > Network >
Control Port (UDP) (Valid after Restart)
(000001=1 to 065535=65535)
0148 000001 ~
065535
SET > Network >
Serial Port (UDP) (Valid after Restart)
(000001=1 to 065535=65535)
0149 000001 ~
065535
SET > Network >
Audio Port (UDP) (Valid after Restart)
(000001=1 to 065535=65535)
0150 00 or 01 SET > Network >
Internet Access Line (Valid after Restart)
( 00=FTTH (Fiber To The Home), 01=ADSL/
CATV)
0151 See p. 15 SET > Network > Network Radio Name
(Up to 16 characters)
0152 0000 ~ 0255 SET > Display > LCD Backlight
(0000=0% to 0255=100%)
0153 00 or 01 SET > Display > Display Type
(00=A, 01=B)
0154 00 or 01 SET > Display > Display Font
(00=Basic, 01=Round)
0155 00 or 01 SET > Display > Meter Peak Hold (Bar)
(00=OFF, 01=ON)
0156 00 or 01 SET > Display > Memory Name
(00=OFF, 01=ON)
0157 00 or 01 SET > Display >
MN-Q Popup (MN OFF→ON)
(00=OFF, 01=ON)
0158 00 or 01 SET > Display > BW Popup (PBT)
(00=OFF, 01=ON)
0159 00 or 01 SET > Display > BW Popup (FIL)
(00=OFF, 01=ON)
0160 00 to 03 SET > Display > RX Call Sign Display
(00=OFF, 01=Normal, 02=RX Hold, 03=Hold)
0161 00 or 01 SET > Display > RX Position Indicator
(00=OFF, 01=ON)
0162 00 to 02 SET > Display > RX Position Display
( 00=OFF, 01=ON (Main/Sub),
02=ON (Main Only))
Cmd. Sub cmd. Data Description
1A* 05 0163 00 to 04 SET > Display > RX Position Display Timer
( 00=5 sec, 01=10 sec, 02=15 sec,
03=30 sec, 04=Hold)
0164 00 or 01 SET > Display > Reply Position Display
(00=OFF, 01=ON)
0165 00 to 02 SET > Display > TX Call Sign Display
( 00=OFF, 01=Your Call Sign,
02=My Call Sign)
0166 00 or 01 SET > Display > Scroll Speed
(00=Slow, 01=Fast)
0167 00 to 03 SET > Display > Screen Saver
( 00=OFF, 01=15 min.,
02=30 min., 03=60 min.)
0168 00 or 01 SET > Display > Opening Message
(00=OFF, 01=ON)
0169 00 or 01 SET > Display > Power ON Check
(00=OFF, 01=ON)
0170 00 or 01 SET > Display > Display Unit >
Latitude/Longitude
(00=ddd°mm.mm', 01=ddd°mm'ss")
0171 00 or 01 SET > Display > Display Unit >
Altitude/Distance
(00=m, 01=ft/mi)
0172 00 to 02 SET > Display > Display Unit > Speed
(00=km/h, 01=mph, 02=knots)
0173 00 or 01 SET > Display > Display Unit > Temperature
(00=ºC, 01=ºF)
0174 00 to 03 SET > Display > Display Unit > Barometric
(00=hPa, 01=mb, 02=mmHg, 03=inHg)
0175 00 or 01 SET > Display > Display Unit > Rainfall
(00=mm, 01=inch)
0176 00 to 03 SET > Display > Display Unit > Wind Speed
(00=m/s, 01=km/h, 02=mph, 03=knots)
0177 00 or 01 SET > Display > Display Language
(00=English, 01=Japanese)
0178 00 or 01 SET > Display > System Language
(00=English, 01=Japanese)
0179 20000101 ~
20991231
SET > Time Set > Date/Time > Date
(20000101=2000/01/01 to 20991231=2099/12/31)
0180 0000 ~ 2359 SET > Time Set > Date/Time > Time
(0000=00:00 to 2359=23:59)
0181 00 or 01 SET > Time Set > Date/Time > NTP Function
(00=OFF, 01=ON)
0182 See p. 15 SET > Time Set > Date/Time >
NTP Server Address
0183 00 or 01 SET > Time Set > Date/Time >
GPS Time Correct
(00=OFF, 01=Auto)
0184 See p. 16 SET > Time Set > UTC Offset
0185 00 to 02 SET > SD Card > Import/Export >
CSV Format > Separator/Decimal
( 00=Separator is “ , ” and Decimal is “ . ,”
01=Separator is “ ; ” and Decimal is “ . ,”
02=Separator is “ ; ” and Decimal is “ , ”)
0186 00 to 02 SET > SD Card > Import/Export >
CSV Format > Date
( 00=““yyyy/mm/dd,” 01=“mm/dd/yyyy,”
02=“dd/mm/yyyy”)
0187 00 or 01 SCOPE > Scope during Tx (CENTER TYPE)
(00=OFF, 01=ON)
0188 00 to 02 SCOPE > Max Hold
(00=OFF, 01=10s Hold, 02=ON)
0189 00 ~ 02 SCOPE > CENTER Type Display
( 00=Filter center, 01=Carrier point center,
02=Carrier point center (Abs. Freq.))
0190 00 or 01 SCOPE > Marker Position (Fix Type)
(00=Filter center, 01 Carrier point)
0191 See p. 16 SCOPE > VBW
0192 00 to 03 SCOPE > Averaging
(00=OFF, 01=2, 02=3, 03=4)
0193 00 or 01 SCOPE > Waveform Type
(00=Fill, 01=Fill+Line)
0194 See p. 16 SCOPE > Waveform Color (Current)
0195 See p. 16 SCOPE > Waveform Color (Line)
0196 See p. 16 SCOPE > Waveform Color (Max Hold)
0197 00 or 01 SCOPE > Waterfall Display
(00=OFF, 01=ON)
D Command table (Continued)
Remote control
8
To Next Page
Loading...
