18
11
OPTIONS
D Battery packs
1
Operating periods are calibrated for the following conditions:
at 25°C (77°F), Tx (high power) : Rx : standby = 5 : 5 : 90
*
2
When Ni-Cd batteries are installed.
D Other options
BC-110A/D/V WALL CHARGER
Used for regular charging of the connected battery pack.
BC-119
DESKTOP CHARGER + AD-81 CHARGER ADAPTOR
For rapid charging of battery packs. An AC adapter is sup-
plied with the charger. Some BC-119 versions require the AD-
75 additionally. Charging time: 1.5 to 2 hrs.
BC-121
MULTI-CHARGER
+ AD-81
CHARGER ADAPTOR
For rapid charging up to 6 battery packs simultaneously. An
AC adapter may be supplied depending on version. Six AD-
81’s are necessary. Charging time: 1.5 to 2 hrs.
OPC-254L
DC POWER CABLE
CP-12L
CIGARETTE LIGHTER CABLE WITH NOISE FILTER
Allows you to charge a battery pack connected to the trans-
ceiver via a DC power source (12–16 V DC) For charging
ONLY—the transceiver cannot be simultaneously operated.
HM-119
SPEAKER MICROPHONE
Combination speaker and microphone.
SP-13
EARPHONE
Provides clear audio in noisy environments.
OPC-752
HEADSET ADAPTER
When using an optional headset, such as those from the
David Clark Co. via the adapter
, the transceiver outputs your
transmitted voice to the headset for monitoring. (p. 19)
EX-2119
FIELD PROGRAMMING SOFTWARE
Provides quick and easy programming of items, including pri-
vate channels, scan settings, etc., via an IBM
®
compatible PC
to transceiver.
OPC-474
CLONING CABLE
Cloning cable for transceiver to transceiver.
OPC-478
CLONING CABLE
Cloning cable for PC to transceiver.
IBM
®
is a registered trademark of International Business Machines.
To Next Page
Loading...
