Icom IC-F3400DT - Disconnecting from a Bluetooth Device

11
Bluetooth
®
OPERATION
11-13
Disconnecting from a Bluetooth
®
device
You can disconnect from a Bluetooth
®
device without
cancelling the pairing.
<Menu operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD types
(Menu > Bluetooth > BT Device List)
1. Push [Menu] to display the “Menu” screen.
2. Push [Left] or [Right] to select “Bluetooth,” then
push [OK].
3. Push [Up] or [Down] to select “BT Device List,”
then push [OK].
4. Push [Up] or [Down] to select the Bluetooth
®
device that is currently connected, then push
[OK].
5. Push [Up] or [Down] to select “Disconnect,” then
push [OK].
TIP: You can reconnect to the Bluetooth
®
device
displayed on the screen again by doing the following
steps.
1. Push [Up] or [Down] to select the Bluetooth
®
device to connect, then push [OK].
2. Push [Up] or [Down] to select “Connect,” then
push [OK].
• Connects to the device.
3. Do steps 5 (‘Setting the Bluetooth
®
Serial Port’)
and 6 (‘Connection’) on page 11-10 to connect.
6. The transceiver disconnects from the Bluetooth
®
device, and “✔” disappears beside the device’s
icon.
L The transceiver is still paired with the Bluetooth
®
device.
Previous view