15
3 BIIS OPERATION
New2001
■ Receiving a message
DD
Receiving a status message
qWhen a status message is received;
• Beeps sound.
• The calling station ID (or text) and the status message is
displayed alternately.
wPush [MONI (P4)] to return to standby condition.
NOTE: Only the calling station ID (or text) is displayed (no
message is displayed alternately) when the scroll timer is
set to “OFF.” In this case, push [Z] to display the status
message.
DD
Receiving an SDM
qWhen a status message is received;
• Beeps sound.
•“ ” appears.
• The calling station ID (or text) and the SDM is displayed
alternately.
wWhen the received SDM includes more than 10 characters,
“S” is displayed and scrolls the message automatically.
• Push [Y]/[Z] to scroll the message manually.
ePush [MONI (P4)] to return to standby condition.
IC-F510 Series_BIIS-2.qxd 06.7.13 1:31 PM Page 15 (1,1)
To Next Page
Loading...
Need help?
General
