3
1 PANEL DESCRIPTION
New2001
■ Function display
qTRANSMIT INDICATOR
Appears while transmitting.
wRECEIVE INDICATOR
Appears when a signal is received, or the squelch is open.
eSIGNAL STRENGTH INDICATOR
Shows the relative signal strength while receiving signals.
rOUTPUT POWER INDICATOR
Appears when Low 2 or Low 1 is selected.
tAUDIBLE INDICATOR
➥ Appears when the channel is in the ‘audible’
(unmute)
condition.
➥ Appears when the specific 5-tone/BIIS code is received.
yCOMPANDER INDICATOR
Appears when the compander function is activated.
uSCRAMBLER INDICATOR
Appears when the voice scrambler function is activated.
• Optional UT-109/110 is required.
iBELL INDICATOR
Appears/blinks when the specific 5-tone/BIIS code is re-
ceived, according to the programming.
oCALL CODE MEMORY INDICATOR
Appears when the call code memory is selected.
!0SCROLL INDICATOR
Appears when a received SDM including more than 10
characters is displayed.
!1SDM INDICATOR
Appears when an SDM is received, or a transmit SDM is
selected.
!2MULTI-FUNCTION INDICATOR
Shows the operating channel number and code simultane-
ously with the default setting.
The displayed information may differ according to the pro-
gramming.
!3ACTIVATED KEY INDICATOR
Appears above the key assigned as the [DIGITAL] key
when that key has been activated.
IC-F510 Series_BIIS-2.qxd 06.7.13 1:31 PM Page 3 (1,1)
To Next Page
Loading...
Need help?
General
