1 - 1
SECTION 1 SPECIFICATIONS
‘‘
GENERAL
• Frequency range : 450–480 MHz
• Type of emission : 16K0F3E / 8K50F3E
• Frequency resolution : 25 or 12.5 kHz
• Number of channels : Max. 32 channel
• Antenna connector :N-type
×
2 (50 Ω)
• Power supply requirement : 100–120 V AC [120V VERSION]
220–240 V AC [220V VERSION]
13.6 V (negative ground)
• Current drain (at 13.6 V) : Less than 20 A (TX)
Less than 1A (RX standby)
Less than 2A (RX max power)
• Operating temperature range : –30˚C to +60˚C (–22˚F to +140˚F)
• Dimensions (projections not included) : 410
(W) ×
110
(H) ×
360
(D) mm
16.1
(W) ×
4.3
(H) ×
14.1
(D) inch
• Weight : 12 kg (26.5 lb)
‘‘
TRANSMITTER
• Output power : 50 W
• Modulation system : Variable reactance frequency modulation
• Max. frequency deviation : ±5.0 kHz (Wide) / ±2.5 kHz (Narrow)
• Spurious emissions : –70 dBc typical
• Adjacent channel power : More than 70 dB (Wide)
More than 60 dB (Narrow)
• Input impedance : 600 Ω
‘‘
RECEIVER
• Receiving system : Double conversion superheterodyne system
• Intermediate frequency : 1st; 70 MHz
2nd; 455 kHz
• Sensitivity (12 dB SINAD) : 0.5 µV; 12 dB SINAD
• Adjacent channel selectivity : More than 70 dB (Wide)
More than 60 dB (Narrow)
• Spurious response : More than 70 dB
• Intermodulation : More than 70 dB
• Audio output power : 2.5 W at 10% distortion with an 4 Ω load
• Audio output impedance : 4 Ω
All stated specifications are subject to change without notice or obligation.
To Next Page
Loading...
Need help?
General
