What does Self check error (Battery voltage) mean for Icom Two-Way Radio?
If your Icom Two-Way Radio displays a self-check error related to battery voltage, it means that the connected battery pack’s voltage is more than 11 V. You should verify that the battery voltage is correct.
What to do if my Icom Two-Way Radio does not turn ON?
If your Icom Two-Way Radio does not turn on, the battery may be exhausted. In this case, change to a new battery pack. Alternatively, the battery pack may not be correctly attached; ensure it is properly connected.
Why Icom Two-Way Radio has no sound from the speaker?
If there is no sound from the speaker of your Icom Two-Way Radio, the squelch level might be set too high. Try setting the squelch to the threshold point. Also, check if the volume level is set too low and adjust it to a suitable level. The speaker or the [MIC/SP] connector might have been exposed to water. Remove the water from the speaker or dry the [MIC/SP] connector.
What to do if Icom IC-GM1600 Two-Way Radio self check error shows battery voltage?
If your Icom Two-Way Radio displays a self-check error related to battery voltage, it indicates that the connected battery pack’s voltage is more than 11 V. Verify that the battery voltage is correct.
General| Purpose | Marine Radio Service |
|---|---|
| Operating frequency | 156.300 – 156.875 MHz |
| Display type | LCD |
| Battery type | BP-234 |
| Rechargeable | No |
| Battery technology | Lithium |
| Battery low indication | Yes |
| Number of batteries supported | 1 |
| Product color | Yellow |
| Waterproof up to | 1 m |
| Operating temperature (T-T) | -20 - 60 °C |
| Number of batteries included | 1 pc(s) |
Weight and Dimensions| Depth | 44 mm |
|---|---|
| Width | 65 mm |
| Height | 145 mm |
| Weight | 385 g |
Discusses potential interference and operational restrictions.
Covers call priorities and continuous monitoring requirements.
Outlines rules regarding overheard information and language.
Details ship station and operator license needs.
Lists all items included with the transceiver.
Instructions for attaching neckstrap and belt clip.
Instructions for installing and removing the battery pack.
Identifies and explains external buttons and indicators.
Explains the symbols and readouts on the LCD screen.
How to select channels, including distress and call channels.
Instructions for using and programming call channels.
Step-by-step instructions for sending and receiving.
How to reprogram the call channel for quick recall.
How to set the squelch for optimal reception.
How to activate lock and monitor functions.
Explains backlight use and signal strength display.
Steps to enter and navigate the configuration settings.
Configuration options for beep tones and monitor switch.
Adjusting backlight brightness and LCD contrast.
How to enable/disable the auto power save feature.
Explains the self-check feature and error indicators.
Controls the display of battery voltage.
Configures the signal strength indicator display.
Adjusts squelch sensitivity to reduce noise.
A quick reference list of all SET MODE functions.
Steps and precautions for charging the battery.
Important warnings for handling and charging batteries.
How to connect the charger and battery pack.
Details contents and how to attach the belt clip.
Instructions on how to remove the belt clip.
To Next Page
