2
BASIC OPERATION
8
D Activating the scrambler
The optional voice scrambler provides private communica-
tions. In order to receive or send scrambled transmissions you
must first activate the scrambler function. To activate the func-
tion, an optional UT-98 is necessary. Ask your dealer for de-
tails.
1 Select an operating channel
except channel 16 or weather
channels.
2 Push [
SCN•SCRM] for 1 sec.
- “SCRM” appears.
3 To turn the scrambler function
OFF, repeat step 2.
- “SCRM” disappears.
D Programming scramble codes
There are 128 codes (00 to 127) available for programming.
In order to understand one another, all transceivers in your
group must have the same scramble code.
1 Select an operating channel except channel 16 or weather
channels.
2 Make sure the scramble function is OFF, then push and
hold [
SCN•SCRM] until step 4.
- “SCRM” appears.
3 While continuing to push [SCN•SCRM], rotate the channel
selector to select the desired scramble code.
- The first click when rotating the channel selector shows the cur-
rently selected code.
4 Release [
SCN•SCRM].
- The scramble code disappears from the function display but re-
mains in effect while the scramble function is activated.
■ Optional voice scrambler operation
To Next Page
Loading...
Need help?
General
