Icom IC-M1 User Manual

■ Channel selection
D Channel 16
Channel 16 is the distress channel. It is used for establishing
initial contact with another station and for emergency com-
munications. Channel 16 is monitored during dualwatch/
tri-watch. While standing by you are required to monitor chan-
nel 16.
D Channel 9 (Call channels)
Channel 9 is the pleasure call channel. Each regular channel
group has separate call channels. In addition, each call chan-
nel is monitored during tri-watch. The call channels can be
programmed (p. 9) and are used to store your most often-
used channels in each channel group for quick recall.
•Push [
16•9] for 1 sec. to select
the call channel of the selected
channel group.
- “CALL” and call channel number
appear.
- Each channel group may have an
independent call channel after
changing a call channel.
Push
USA
9
1
6
2
BASIC OPERATION
5
USA
Push for 1 sec.
INT
DUP
U.S.A. channels
Canadian channelsInternational channels
CAN
TAG
U
/
I/
C
C
H
/
W
X
U
/
I/
C
C
H
/
W
X
U
/
I/
C
C
H
/
W
X
CALL
USA
TAG
D U.S.A., Canadian and international channels
There are 61 U.S.A., 57 Canadian and 57 international chan-
nels. These channel groups may be specified for the operat-
ing area.
1 Push [CH/WX] to select a regular channel.
- If a weather channel appears, push [CH/WX] again.
2 Rotate the channel selector to select a channel.
- “DUP” appears for duplex channels.
3 To change the channel group, push [CH/WX•U/I/C] for 1
sec.
- U.S.A., Canadian and international channels can be selected in
sequence.

Icom IC-M1 Specifications

General

Brand	Icom
Model	IC-M1
Category	Transceiver
Language	English