D Priority scan function “Pr”
The transceiver has 2 scan types. Normal scan and priority
scan. Normal scan searches all tag channels in the selected
channel group. Priority scan searches all tag channels in se-
quence while monitoring Channel 16.
D Scan resume timer “St”
The scan resume timer can be selected as a pause (OFF) or
timer scan (ON). When OFF is selected, the scan pauses
until a received signal disappears. When ON is selected, the
scan pauses for 5 sec. after receiving a signal and then re-
sumes even if the signal is still being received.
14
6
SET MODE
D Auto scan function
“AS”
While in standby, this function automatically starts the desired
scan (normal or priority scan) 30 sec. after operation.
• Scan indicator blinks while scanning.
D Monitor action selection “Sq”
The monitor function cuts off the squelch function temporarily.
This selection contains PUSH or HOLD settings as shown
below.
• PUSH (Pu): After pushing the [SQL•
MONI] for 1 sec., the
squelch function is cut off until [SQL•
MONI] is
released. (default)
• HOLD (Ho): After pushing the [SQL•
MONI] for 1 sec., the
squelch function is cut off continuously until
another key is pushed.
To Next Page
Loading...
Need help?
General
