Icom IC-M324 - Page 67

57
7
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D Receiving a Position Report Call
When a Position Report Call is received:
The alarm sounds for 2 minutes. ➥
“RCVD POSITION REPORT” is displayed. The backlight ➥
blinks for 2 minutes.
Push [ALARM OFF] to stop the alarm and the blinking q
backlight.
 •Evenifyoudonotpush[ALARMOFF],thealarmstopsafter2
minutes, and then the screen in step w is displayed.
Push a softkey to select your desired action. w
[EXIT]
Push to ignore the Call and return to the normal operat- ➥
ing mode.
  •ThetransceiverexitstheDSCmode.
  •“ ” continues to blink and the Call is stored in the Received
Call Log.
[INFO]
Push to display the Received call information. (p. 60) ➥