Icom IC-M324 - Radio and Configuration Settings

60
7
DSC OPERATION
■ Received Call log
The transceiver automatically stores up to 50 distress mes-
sages and 50 other messages, and they can be used as a
supplement to your logbook.
•Whileinthenormaloperatingmode,“ ” blinks in the upper right
corner of the LCD when there is an unread DSC message.
Distress message D
Push [LOG] to enter “RCVD CALL LOG” in the DSC CALLS q
menu, or you can enter it through the Menu screen.
MENU ➪ DSC Calls ➪ Received Call Log
(Push [MENU].) (Rotate Dial, then push [ENT].)
Push [ w Y]/[Z] to select “Distress,” then push [ENT].
 •TheDistressmessagesarestoredin“Distress.”
 •“ ” is displayed when there are unread DSC messages.
 •“ ” is displayed when there are no unread DSC messages.
 •NoiconisdisplayedwhentherearenoDSCmessages.
 •Push[BACK]toreturntothepreviousscreen.
 •Push[EXIT]toreturntothenormaloperatingmode.
Push [ e Y]/[Z] to select the desired item, then push [ENT].
Rotate Dial to scroll the DSC message contents. r
Rotate
To delete the displayed DSC message, push [DEL]. t
 •Theconrmationscreenisdisplayed,thenpush[OK]todelete.
Push [EXIT] to return to the normal operating mode. y