Icom IC-M34 - Operating Rules and Licensing; Radio Licensing Requirements

3 - 1
SECTION 3 DISASSEMBLY INSTRUCTION
1. Removing the Front panel
• Unscrew 4 screws A, and remove the rear panel from the
Front panel.
3. Removing the MAIN UNIT
q Unsolder 2 points B (Bottom side).
w Unsolder 1 point C (The core of the antenna connector).
e Unscrew 7 screws D, and remove the chassis from the
MAIN UNIT.
2. Removing the Chassis
q Unscrew the antenna nut.
w Disconnect the speaker cable from the MAIN UNIT.
e Take off the chassis from the front panel inthe direction
of the arrow.
Front panel
Rear panel
A
A
Front panel
MAIN UNIT
Antenna nut
Speaker cable
CHASSIS
D×7
C
B
(Bottom side)