Why does the noise cancellation not work on my Icom IC-M36?
If the noise cancellation feature isn't working on your Icom Transceiver, it could be due to a couple of things. First, check if the sub-microphone is covered by something and ensure it's clear. Second, if you have an optional external speaker-microphone connected, try disconnecting it.
What does battery voltage error mean on my Icom Transceiver?
If your Icom Transceiver displays a battery voltage error, it means the connected battery pack's voltage is more than 11 V. Make sure the battery voltage is correct.
How to turn on beep sounds on Icom Transceiver?
If you're not hearing any beep sounds on your Icom Transceiver, the beep tone function is likely turned OFF. To turn it back ON, go to the set mode and set the beep tone function to ON (either Fix Beep or User Beep).
General| Purpose | Marine Radio Service |
|---|---|
| Operating frequency | 156.025 – 157.425 MHz |
| Antenna connector type | FA-SC58V |
| Number of antenna connectors | 1 |
| Battery type | BP-252 |
| Battery life (max) | 8 h |
| Battery low indication | Yes |
| Product color | Black |
| Waterproof up to | 1 m |
| International Protection (IP) code | IP57 |
| Operating temperature (T-T) | -20 - 60 °C |
| Number of batteries included | 1 pc(s) |
Weight and Dimensions| Depth | 43 mm |
|---|---|
| Width | 62 mm |
| Height | 139.5 mm |
| Weight | 295 g |
To Next Page
